Shutdowns
Chute, liner, screen and structural repairs inside a fixed window at plants, quarries and recycling facilities.
Trade labour hire · Sydney & NSW
Boilermaker labour hire in Sydney
Boilermakers who read the drawing, mark it out, cut it, fit it and weld it. Shop or site. Structural or plate. A one-off repair or a full fabrication package.
The trade
What our boilermakers do on Sydney sites
A boilermaker is the trade that turns a drawing into steel. On Sydney sites that means fabricating and installing platforms, stairs and handrails; building chutes, hoppers, bins and ductwork; fitting wear plate and liners in recycling and quarry plant; repairing tanks, screens and conveyor structure during shutdowns; and knocking out the brackets and modifications every maintenance crew needed yesterday.
We supply boilermakers to fabrication shops in Smithfield, Wetherill Park, Padstow and Ingleburn, to maintenance crews in plants across Western Sydney, to construction projects around Parramatta and the airport precinct, and to heavy industry in Newcastle, the Hunter and Port Kembla. Most of ours came up through the shop floor and weld to a coded standard. All of them can hold a tape, a square and a grinder and use them properly.
- Shop fabrication: marking out, cutting, fit-up, tacking, welding out, finishing.
- Site installation: platforms, stairs, handrails, conveyors, structural modifications.
- Plate and wear work: liners, hardfacing, chutes, hoppers and bins.
- Shutdown repairs: tanks, screens, ductwork and the structure nobody else can reach.
Roles & tickets
Who we supply
Fabricators who weld, welders who fabricate, and the lifting tickets that let them move their own steel.
TradeFabrication trade boilermakersCertificate III in Engineering (Fabrication Trade), heavy fabrication stream, or recognised overseas equivalent.
CodeAS/NZS 1554 structural weldingSP and GP category welds, MIG, flux-core or stick, in position.
CodeAS 1796 certificate holdersFor pressure equipment and inspected work where your scope requires it.
CuttingOxy, plasma & drawing interpretationWeld symbols, fabrication tolerances, developments and cut lists.
LiftingDogging DG, forklift LF, CB craneSlinging and moving their own work in the shop and on site; EWP WP for installs.
Site ticketsHeights, confined space, hot workWhite Card as standard; Working at Heights, Confined Space and Gas Test for shutdown roles.
The Smart Standard
How we trade-test boilermakers
Our boilermaker test is a small fabrication job, not a quiz. We hand over a detail drawing with weld symbols, tolerances and a cut list, and ask them to mark out, cut, fit up and tack the assembly, then weld it out in position. We measure the result: dimensions against tolerance, squareness, weld size and profile, distortion.
Then we talk. Material identification, from mild steel and stainless to abrasion-resistant plate. Preheat. How they would sequence welds on a long run to control pull. What they do when the drawing and the steel disagree. A boilermaker who asks the right question before cutting saves you a week.
- 01
Drawing to steel
Mark out, cut, fit and tack a detail from a real drawing with tolerances.
- 02
Weld out and measure
In-position welds, then dimensions, squareness, weld profile and distortion checked.
- 03
Materials and sequencing
Material ID, preheat, weld sequencing and distortion control, talked through.
- 04
The rest of the standard
Ticket verification, VEVO, National Police Check, medical, psychometric profile and our safety induction.
Engagements
How Sydney sites use our boilermakers
Fabrication packages
Extra hands in the shop when a steel package is due and the floor is already full.
Site installation
Platforms, stairs, handrails and conveyor structure fitted and welded on site.
Breakdowns
A cracked hopper or failed stringer that has to be back in service before the next shift.
Shift & leave cover
Cover for your own boilermakers without losing the production rhythm.
Long-term & temp-to-perm
A boilermaker embedded in your crew, with the option to make it permanent.
Industries
Where the steel is
Also common: production fabrication in manufacturing, plant repairs in logistics & warehousing, and structural work in infrastructure & utilities.
Questions
Boilermaker hire FAQs
What is the difference between a boilermaker and a welder?
A boilermaker holds a fabrication trade: they read drawings, mark out, cut, fit and weld. A welder joins metal. If your brief is "build this" or "modify that", you want a boilermaker. If it is "weld these joints", a welder may be the better fit. We will tell you which.
Can your boilermakers weld to code?
Most hold current AS/NZS 1554 structural qualifications, and we have AS 1796 certificate holders for pressure and inspected work. Send us your WPS and we will test the boilermaker to it before they start.
Do you supply for workshop or site work?
Both. Shop fabricators for steel packages under delivery pressure, and site boilermakers for installs, shutdowns and repairs. Tell us which, because the best shop hand and the best site hand are not always the same person.
Can they sling and move their own steel?
Many of our boilermakers hold dogging (DG), forklift (LF) and bridge and gantry crane (CB) tickets, so they can work with your crane crew or move their own work in the shop. We verify every ticket before they start.
Are they inducted for my site?
Every boilermaker completes the Smart Industrial safety induction before they step on your site, with tickets, licences, VEVO and police check already verified. Your site-specific induction then sits on top, and we make sure they arrive with the paperwork your gatehouse asks for.
How are rates and minimum engagements set?
We quote on the brief: trade level, tickets, shift pattern, location and duration. Rates are built on the applicable award, so you know the worker is paid correctly. There is no minimum volume commitment to work with us.
Related trades
Often hired with boilermakers
Ready when you are
Let's build.
Tell us the trade, the site and the start date. We'll do the rest.